Details
yellow container
Refine Details Search
System Type
Detail Category
yellow Container
Submittal Wizard
System Type Detail Category
FB - FleeceBACK EPDM back to top
FB-15-A Inside Corner/Continuous Membrane (PDF) (PDF - 71 Kb) Corners - 15 
FB-15-B Inside Corner/ Separate FleeceBACK Flashing (PDF) (PDF - 71 Kb) Corners - 15 
FB-15-C Inside Corner/ Separate EPDM Wall Flashing (PDF) (PDF - 51 Kb) Corners - 15 
FB-15-D Outside Corner/ FleeceBACK Membrane Flashing (PDF) (PDF - 89 Kb) Corners - 15 
FB-15-E Outside Corner/ Cured EPDM Flashing (PDF) (PDF - 64 Kb) Corners - 15 
FB-15-F Sure-Seal Pressure-Sensitive Inside Corner (PDF) (PDF - 68 Kb) Corners - 15 
FB-15-G Sure-Seal Pressure-Sensitive Outside Corner (PDF) (PDF - 86 Kb) Corners - 15 
FB-6-A Roof Drain Continuous FleeceBACK (PDF) (PDF - 73 Kb) Drains - 6 
FB-6-B Roof Drain (Separate Section of Cured EPDM Membrane) (PDF) (PDF - 70 Kb) Drains - 6 
FB-3-A Deck to Deck Expansion Joint (PDF) (PDF - 55 Kb) Expansion Joints - 3 
FB-3-B Deck to Wall Expansion Joint (PDF) (PDF - 60 Kb) Expansion Joints - 3 
FB-27-A Sure-Seal Insulation Attachment (PDF) (PDF - 40 Kb) Insulation Attachment - 27 
FB-27-B 1 ½ Inch Minimum Sure-Seal Polyisosyanurate Insulation (PDF) (PDF - 48 Kb) Insulation Attachment - 27 
FB-27-C OSB Attachment (PDF) (PDF - 48 Kb) Insulation Attachment - 27 
FB-27-D Sure-Seal Insulation for Reroof / No Tear-Off Projects (PDF) (PDF - 57 Kb) Insulation Attachment - 27 
FB-1-A (OPTION 2 ) SecurEdge 200 (PDF) (PDF - 56 Kb) Metal Edging & Gravel Stop - 1 
FB-1-B Sure-Seal Drip Edge/Pressure-Sensitive Flashing (PDF) (PDF - 66 Kb) Metal Edging & Gravel Stop - 1 
FB-1-C Carlisle SecurEdge/Anchor Bar Edge (PDF) (PDF - 46 Kb) Metal Edging & Gravel Stop - 1 
FB-12-A Parapet/Curb Continuous FleeceBACK Membrane (PDF) (PDF - 45 Kb) Parapet & Curbs - 12 
FB-12-B Parapet/Curb FleeceBACK Membrane Flashing (PDF) (PDF - 54 Kb) Parapet & Curbs - 12 
FB-12-C Parapet/Curb - Cured EPDM (SecurTAPE) (PDF) (PDF - 52 Kb) Parapet & Curbs - 12 
FB-8 One-Way Pressure Relief Vent (PDF) (PDF - 54 Kb) Pipes - 8 
FB-2-B Membrane Splice with SecurTAPE (PDF) (PDF - 53 Kb) Splices - 2 
FB-2-C Splice Tape Intersection At Cap Sheet (PDF) (PDF - 115 Kb) Splices - 2 
FB-2-E End Lap Splice Cured Cover Strip (PDF) (PDF - 48 Kb) Splices - 2 
WEMFf-1 Sure-White FleeceBACK EPDM Membrane Seam Detail (PDF) (PDF - 86 Kb) Splices - 2 
WEMFf-2 Sure-White FleeceBACK EPDM Membrane Seam Detail (PDF) (PDF - 98 Kb) Splices - 2 
FB-9 Vertical Flashing Termination (PDF) (PDF - 110 Kb) Terminations - 9 
FB - FleeceBACK EPDM - 30 yr. back to top
X3FB-15A INSIDE CORNER WITH SEPARATE EPDM WALL FLASHING (PDF) (PDF - 109 Kb) Corners - 15 
X3FB-15B INSIDE CORNER WITH CONTINUOUS EPDM WALL FLASHING (PDF) (PDF - 97 Kb) Corners - 15 
X3FB-15C OUTSIDE CORNER WITH PRESSURE-SENSITIVE UNCURED FLASHING (PDF) (PDF - 121 Kb) Corners - 15 
X3FB-5 CURB FLASHING (PDF) (PDF - 69 Kb) Curb & Skylights - 5 
X3FB-3A Deck to Deck Expansion Joint (PDF) (PDF - 50 Kb) Expansion Joints - 3 
X3FB-3B Deck to Wall Expansion Joint (PDF) (PDF - 72 Kb) Expansion Joints - 3 
X3FB-27A 4' x 8' INSULATION ATTACHMENT (PDF) (PDF - 54 Kb) Insulation Attachment - 27 
X3FB-27B 4' x 8' OSB ATTACHMENT (PDF) (PDF - 55 Kb) Insulation Attachment - 27 
X3FB-1B Carlisle SecurEdge Anchor Bar Edging (PDF) (PDF - 54 Kb) Metal Edging & Gravel Stop - 1 
X3FB-1C Sure-Seal Drip Edge (PDF) (PDF - 106 Kb) Metal Edging & Gravel Stop - 1 
X3FB-1D Metal Bar Termination (PDF) (PDF - 41 Kb) Metal Edging & Gravel Stop - 1 
X3FB-12A PARAPET/CURB WITH CONTINUOUS FLEECEBACK MEMBRANE (PDF) (PDF - 60 Kb) Parapet & Curbs - 12 
X3FB-12C PARAPET/CURB WITH CURE EPDM MEMBRANE (SECURTAPE) (PDF) (PDF - 91 Kb) Parapet & Curbs - 12 
X3FB-14A FIELD FABRICATED PIPE SEAL (PDF) (PDF - 68 Kb) Pipe Flashings - 14 
X3FB-14B FLEXIBLE PENETRATION (PDF) (PDF - 141 Kb) Pipe Flashings - 14 
X3FB-14C FIELD FABRICATED HOT STACK (PDF) (PDF - 64 Kb) Pipe Flashings - 14 
X3FB-8 SURE-SEAL PRESSURE-SENSITIVE MOLDED PIPE SEAL (PDF) (PDF - 130 Kb) Pipes - 8 
X3FB-16A SURE-SEAL PRESSURE-SENSITIVE POURABLE SEALER POCKET WITH RAIN HOOD (PDF) (PDF - 83 Kb) Pockets - 16 
X3FB-16B SURE-SEAL PRESSURE-SENSITIVE POURABLE SEALER POCKET - DOUBLE APPLICATION (PDF) (PDF - 87 Kb) Pockets - 16 
X3FB-16C MULTIPLE PENETRATIONS CURB DETAIL (PDF) (PDF - 56 Kb) Pockets - 16 
X3FB-1 80 MPH Wind Speed Assembly (Option #1) (PDF) (PDF - 72 Kb) Roof Assembly Options 
X3FB-B 80 MPH WIND SPEED ASSEMBLY (OPTION #2) (PDF) (PDF - 53 Kb) Roof Assembly Options 
X3FB-C 90 MPH WIND SPEED ASSEMBLY (PDF) (PDF - 54 Kb) Roof Assembly Options 
X3FB-D 100 MPH WIND SPEED ASSEMBLY (PDF) (PDF - 59 Kb) Roof Assembly Options 
X3FB-E 120 MPH WIND SPEED ASSEMBLY (PDF) (PDF - 62 Kb) Roof Assembly Options 
X3FB-2 Membrane Splice with SecurTape (PDF) (PDF - 81 Kb) Splices - 2 
X3FB-9 VERTICAL FLASHING TERMINATIONS (PDF) (PDF - 89 Kb) Terminations - 9 
FB - FleeceBACK TPO back to top
SWF-15A - Inside Corner Flashing (PDF) (PDF - 40 Kb) Corners - 15 
SWF-15B- Inside Corner Fabrication (PDF) (PDF - 46 Kb) Corners - 15 
SWF-15C - Pre-Milded Outside Corner (PDF) (PDF - 39 Kb) Corners - 15 
SWF-15D - Outside Corner Fabrication (PDF) (PDF - 42 Kb) Corners - 15 
SWF-5 - Pre-Fabricated TPO Curb Wrap Corner (PDF) (PDF - 64 Kb) Curb & Skylights - 5 
SWF-6A - Roof Drain, Continuous FleeceBACK Membrane (PDF) (PDF - 74 Kb) Drains - 6 
SWF-6B - Roof Drain, Separate Section of Sure-Weld Membrane (PDF) (PDF - 73 Kb) Drains - 6 
SWF-6C - Roof Drain, Sump Greater Than 3" to 1 Horizontal Foot (PDF) (PDF - 110 Kb) Drains - 6 
SWF-3A - Deck to Deck Expansion Joint (PDF) (PDF - 55 Kb) Expansion Joints - 3 
SWF-3B- Deck To Wall Expansion Joint (PDF) (PDF - 45 Kb) Expansion Joints - 3 
SWF-27A - Carlisle Insulation Attachment (PDF) (PDF - 40 Kb) Insulation Attachment - 27 
SWF-27B - Carlisle Polyiso Insulation, 1-1/2" Minimum (PDF) (PDF - 47 Kb) Insulation Attachment - 27 
SWF-27C - OSB Attachment (PDF) (PDF - 45 Kb) Insulation Attachment - 27 
SWF-27D - Dens-Deck Primer/Dens-Deck Attachment (PDF) (PDF - 52 Kb) Insulation Attachment - 27 
SWF-1A - Carlisle SecurEdge Anchor Bar Edging (PDF) (PDF - 50 Kb) Metal Edging & Gravel Stop - 1 
SWF-1B - Carlisle SecurEdge 200 - Option 2 (PDF) (PDF - 45 Kb) Metal Edging & Gravel Stop - 1 
SWF-1B Carlisle SecurEdge - Option 1 (PDF) (PDF - 41 Kb) Metal Edging & Gravel Stop - 1 
SWF-1C - Metal Bar Edge Termination (PDF) (PDF - 42 Kb) Metal Edging & Gravel Stop - 1 
SWF-1D - Coated Metal Drip Edge (PDF) (PDF - 65 Kb) Metal Edging & Gravel Stop - 1 
SWF-1E - Metal Drip Edge With Pressure-Sensitive Cover Strip (PDF) (PDF - 76 Kb) Metal Edging & Gravel Stop - 1 
SWF-12A Parapet/Curb - Continuous Sure-Weld FleeceBACK Membrane (PDF) (PDF - 37 Kb) Parapet & Curbs - 12 
SWF-12B Parapet/Curb with Sure-Weld Membrane (PDF) (PDF - 42 Kb) Parapet & Curbs - 12 
SWF-8B Field Fabricated Pipe Flashing (PDF) (PDF - 45 Kb) Pipe Flashings - 14 
SWF-8C Field Fabricated Hot Pipe (PDF) (PDF - 54 Kb) Pipe Flashings - 14 
SWF-8A - Option 1, Sure-Weld Pre-Molded Pipe Flashing (PDF) (PDF - 63 Kb) Pipes - 8 
SWF-8A - Option 2, Sure-Weld Pre-Molded Split Pipe Flashing (PDF) (PDF - 65 Kb) Pipes - 8 
SWF-8D One-Way Pressure Relief Vent (PDF) (PDF - 69 Kb) Pipes - 8 
SWF-8E Sure-Weld TPO Split Pipe Seal (PDF) (PDF - 51 Kb) Pipes - 8 
SWF-8F Sure-Weld TPO Square Tubing Wrap (PDF) (PDF - 55 Kb) Pipes - 8 
SWF-16B - Molded TPO Sealant Pocket (PDF) (PDF - 66 Kb) Pockets - 16 
SWF-18A - Scupper at Deck (PDF) (PDF - 63 Kb) Scuppers - 18 
SWF-18B - Scupper With Sure-Weld Coated Metal (PDF) (PDF - 55 Kb) Scuppers - 18 
SWF-2A - Membrane Splicing (PDF) (PDF - 45 Kb) Splices - 2 
SWF-2B - Membrane Bonding Placement (PDF) (PDF - 61 Kb) Splices - 2 
SWF-9 Vertical Flashing Termination (PDF) (PDF - 109 Kb) Terminations - 9 
SWF-13A Built-Up Roof Tie-In (PDF) (PDF - 55 Kb) Tie-Ins (BUR & EPDM) - 13 
SWF-13B Built-Up Roof Tie-In Concrete Deck (PDF) (PDF - 60 Kb) Tie-Ins (BUR & EPDM) - 13 
SWF-13C Carlisle EPDM/Hypalon Tie-In (DWG) (PDF - 50 Kb) Tie-Ins (BUR & EPDM) - 13 
HM - Hot Mopped EPDM back to top
AFX-15A Inside Corner / Separate EPDM Wall Flashing (PDF) (PDF - 52 Kb) Corners - 15 
AFX-15B Inside Corner / Continuous AFX Membrane (PDF) (PDF - 66 Kb) Corners - 15 
AFX-15C Sure-Seal Pressure-Sensitive Inside Corner (PDF) (PDF - 63 Kb) Corners - 15 
AFX-15D (Option 1) Outside Corner / Pressure-Sensitive or Elastoform Flashing (PDF) (PDF - 57 Kb) Corners - 15 
AFX-15D (Option 2) Outside Corner / Pressure-Sensitive or Elastoform Flashing (PDF) (PDF - 88 Kb) Corners - 15 
AFX-15E Sure-Seal Pressure Sensitive Outside Corner (PDF) (PDF - 80 Kb) Corners - 15 
AFX-6A Roof Drain / Continuous AFX Membrane (PDF) (PDF - 69 Kb) Drains - 6 
AFX-6B Roof Drain / Separate Section of Cured EPDM Membrane (PDF) (PDF - 69 Kb) Drains - 6 
AFX-3C Deck to Deck Expansion Joint (PDF) (PDF - 98 Kb) Expansion Joints - 3 
AFX-3D Deck to Wall Expansion Joint (PDF) (PDF - 79 Kb) Expansion Joints - 3 
AFX-MF-2A Membrane Attachment Splice (PDF) (PDF - 26 Kb) Membrane Attachment - 21 
AFX-MF-2B End Lap Splice Mechanically Fastened AFX (PDF) (PDF - 29 Kb) Membrane Attachment - 21 
AFX-1A (Option 2) SecurEdge 200 or Metal Fascia by others (PDF) (PDF - 268 Kb) Metal Edging & Gravel Stop - 1 
AFX-1B Sure-Seal Drip Edge Pressure-Sensitive Flashing (PDF) (PDF - 67 Kb) Metal Edging & Gravel Stop - 1 
AFX-1C SecurEdge 2000 (PDF) (PDF - 42 Kb) Metal Edging & Gravel Stop - 1 
AFX-1D Metal Drip Edge 20 or 25 Year Membrane System Warranty (PDF) (PDF - 82 Kb) Metal Edging & Gravel Stop - 1 
AFX-12A Parapet / Curb with Cured EPDM (SecurTAPE) (PDF) (PDF - 50 Kb) Parapet & Curbs - 12 
AFX-12B Parapet / Curb with Cured EPDM (Splicing Cement) (PDF) (PDF - 51 Kb) Parapet & Curbs - 12 
AFX-12C Parapet / Curb Continuous AFX Membrane (PDF) (PDF - 58 Kb) Parapet & Curbs - 12 
AFX-8 One-Way Pressure Relief Vent (PDF) (PDF - 48 Kb) Pipes - 8 
AFX-2A Membrane Splice with SecurTAPE (PDF) (PDF - 44 Kb) Splices - 2 
AFX-2B Factory Applied Splice Tape Intersection (PDF) (PDF - 101 Kb) Splices - 2 
AFX-2C End Lap Splice - Option 1 and 2 (PDF) (PDF - 71 Kb) Splices - 2 
AFX-9 Vertical Flashing Terminations (PDF) (PDF - 101 Kb) Terminations - 9 
HM - Hot Mopped TPO back to top
SWHM-15A Inside Corner Separate Sure-Weld AFX Membrane Wall Flashing (PDF) (PDF - 41 Kb) Corners - 15 
SWHM-15B Inside Corner Continuous Sure-Weld AFX Membrane (PDF) (PDF - 45 Kb) Corners - 15 
SWHM-15C Pre-Molded Outside Corner (PDF) (PDF - 35 Kb) Corners - 15 
SWHM-15D Outside Corner Fabrication (PDF) (PDF - 39 Kb) Corners - 15 
SWHM-6A Roof Drain with Continuous Sure-Weld AFX Membrane (PDF) (PDF - 70 Kb) Drains - 6 
SWHM-6B Roof Drain with Separate Sectionof Sure-Wel AFX Membrane (PDF) (PDF - 74 Kb) Drains - 6 
SWHM-6C Roof Drain with Sum Greater than 3" to 1 Horizontal Foot (PDF) (PDF - 107 Kb) Drains - 6 
SWHM-3A Deck-to-Deck Expansion Joint (PDF) (PDF - 52 Kb) Expansion Joints - 3 
SWHM-3B Deck-to-Wall Expansion Joint (PDF) (PDF - 41 Kb) Expansion Joints - 3 
SWHM-1A SecurEdge 200 or Metal Fascia by Others Option #2 (PDF) (PDF - 81 Kb) Metal Edging & Gravel Stop - 1 
SWHM-1A SecurEdge Option #1 (PDF) (PDF - 70 Kb) Metal Edging & Gravel Stop - 1 
SWHM-1B Sure-Seal Drip Edge with Pressure-Sensitive Cover Strip (PDF) (PDF - 76 Kb) Metal Edging & Gravel Stop - 1 
SWHM-1C SecurEdge 2000 (PDF) (PDF - 49 Kb) Metal Edging & Gravel Stop - 1 
SWHM-12A Parapet/Curb Continuous Sure-Weld AFX Membrane (PDF) (PDF - 47 Kb) Parapet & Curbs - 12 
SWHM-12B Parapet/Curb Separate Sure-Weld AFX Membrane (PDF) (PDF - 42 Kb) Parapet & Curbs - 12 
SWHM-8 One-Way Pressure Relief Vent (PDF) (PDF - 63 Kb) Pipes - 8 
SWHM-A Recover/Direct Application (PDF) (PDF - 57 Kb) Roof Assembly Options 
SWHM-B Gypsum, Fibrous Cement or Wood Deck - No Insulation (PDF) (PDF - 70 Kb) Roof Assembly Options 
SWHM-C Gypsum, Fibrous cement or Wood Deck - With Insulation (PDF) (PDF - 94 Kb) Roof Assembly Options 
SWHM-D Lightweight Insulating Concrete - No Insulation (PDF) (PDF - 80 Kb) Roof Assembly Options 
SWHM-E Structural Concrete Deck - No Insulation (PDF) (PDF - 66 Kb) Roof Assembly Options 
SWHM-F Structural Concrete Deck - With Insulation (PDF) (PDF - 88 Kb) Roof Assembly Options 
SWHM-2 Membrane Splicing (PDF) (PDF - 47 Kb) Splices - 2 
SWHM-9 Vertical Flashing Terminations (PDF) (PDF - 103 Kb) Terminations - 9 
CA - Cold Applied TPO back to top
SWC-6A Continuous Membrane - Sure-Weld FleeceBACK AFX Membrane (pdf) (PDF - 56 Kb) Drains - 6 
SWC-6B Separate Section of Membrane - Sure-Weld FleeceBACK AFX Membrane (pdf) (PDF - 64 Kb) Drains - 6 
SWC-6C Sump Greater Than 3" : 12" - Sure-Weld FleeceBACK AFX Membrane (pdf) (PDF - 96 Kb) Drains - 6 
SWC-3A Deck to Deck Expansion Joint - Sure-Weld FleeceBACK AFX Membrane (pdf) (PDF - 46 Kb) Expansion Joints - 3 
SWC-3B Deck to Wall Expansion Joint - Sure-Weld FleeceBACK AFX Membrane (pdf) (PDF - 36 Kb) Expansion Joints - 3 
SWC-27 Carlisle Modified Base Sheet Attachment - Sure-Weld FleeceBACK AFX Membrane (pdf) (PDF - 29 Kb) Insulation Attachment - 27 
SWC-1B SecurEdge With Pressure-Sensitive Cover Strip - Sure-Weld FleeceBACK AFX Membrane (pdf) (PDF - 57 Kb) Metal Edging & Gravel Stop - 1 
SWC-1B Sure-Seal Drip Edge Pressure-Sensitive Cover Strip (pdf) (PDF - 57 Kb) Metal Edging & Gravel Stop - 1 
SWC-1C SecurEdge 2000 (pdf) (PDF - 43 Kb) Metal Edging & Gravel Stop - 1 
SWC-1C SecurEdge 2000 - Sure-Weld FleeceBACK AFX Membrane (pdf) (PDF - 43 Kb) Metal Edging & Gravel Stop - 1 
SWC-12A Parapet Flashing (PDF) (PDF - 47 Kb) Parapet & Curbs - 12 
SWC-12B Parapet Flashing (PDF) (PDF - 52 Kb) Parapet & Curbs - 12 
SWC-8 One-Way Pressure Relief Vent - Sure-Weld FleeceBACK AFX Membrane (pdf) (PDF - 54 Kb) Pipes - 8 
SWC-2 Membrane Splice - Sure-Weld FleeceBACK AFX Membrane (pdf) (PDF - 35 Kb) Splices - 2 
CA - Cold Applied EPDM back to top
SSC-6A Continuous Membrane - Sure-Seal FleeceBACK AFX Membrane (pdf) (PDF - 57 Kb) Drains - 6 
SSC-6B Separate Section of Membrane - Sure-Seal FleeceBACK AFX Membrane (pdf) (PDF - 59 Kb) Drains - 6 
SSC-3C Deck to Deck Expansion Joint - Sure-Seal FleeceBACK AFX Membrane (pdf) (PDF - 91 Kb) Expansion Joints - 3 
SSC-3D Deck to Wall Expansion Joint - Sure-Seal FleeceBACK AFX Membrane (pdf) (PDF - 72 Kb) Expansion Joints - 3 
SSC-1A Option 2 - SecurEdge 200 - Sure-Seal FleeceBACK AFX Membrane (pdf) (PDF - 93 Kb) Metal Edging & Gravel Stop - 1 
SSC-1B Sure-Seal Drip Edge - Sure-Seal FleeceBACK AFX Membrane (pdf) (PDF - 62 Kb) Metal Edging & Gravel Stop - 1 
SSC-1C SecurEdge 2000 - Sure-Seal FleeceBACK AFX Membrane (pdf) (PDF - 43 Kb) Metal Edging & Gravel Stop - 1 
SSC-1D Metal Drip Edge, 20 Year System Warranty - Sure-Seal FleeceBACK AFX Membrane (pdf) (PDF - 72 Kb) Metal Edging & Gravel Stop - 1 
SSC-8 One-Way Pressure Relief Vent - Sure-Seal FleeceBACK AFX Membrane (pdf) (PDF - 40 Kb) Pipes - 8 
SSC-2A Membrane Splice With SecurTAPE - Sure-Seal FleeceBACK AFX Membrane (pdf) (PDF - 35 Kb) Splices - 2 
SSC-2B Factory-Applied Splice Tape Intersection - Sure-Seal FleeceBACK AFX Membrane (pdf) (PDF - 93 Kb) Splices - 2 
SSC-2C End Lap Splice - Sure-Seal FleeceBACK AFX Membrane (pdf) (PDF - 64 Kb) Splices - 2 
EPDM - Adhered back to top
A-6 Roof Drain Sump for Reinforced Membrane System (PDF) (PDF - 76 Kb) Drains - 6 
A-7 (A&B) Optional Grid Nailers (PDF) (PDF - 52 Kb) Grid Nailer - 7 
A-27-A 4'x4' Insulation Attachment (PDF) (PDF - 48 Kb) Insulation Attachment - 27 
A-27-B 4'x8' Insulation Attachment (PDF) (PDF - 50 Kb) Insulation Attachment - 27 
A-27-C 2" Min. Sure-Seal Polyiso Insulation (PDF) (PDF - 52 Kb) Insulation Attachment - 27 
A-27-D 4' x 8' OSB Attachment (PDF) (PDF - 55 Kb) Insulation Attachment - 27 
A-27-E Sure-Seal Insulation for Reroof/No Tearoff Projects (PDF) (PDF - 48 Kb) Insulation Attachment - 27 
A-27-F 1-1/2" Min. Sure-Seal Polyiso Attachment (PDF) (PDF - 47 Kb) Insulation Attachment - 27 
A-27-G 1/4" or 1/2" Thick Dens-Deck Prime Attachment (PDF) (PDF - 47 Kb) Insulation Attachment - 27 
20-1-A Metal Drip Edge - 20 Year System Warranty (PDF) (PDF - 84 Kb) Metal Edging & Gravel Stop - 1 
20-1-B Metal Drip Edge/RUSS - 20 Year Warranty (PDF) (PDF - 70 Kb) Metal Edging & Gravel Stop - 1 
20-1-C Sure-Seal Drip Edge - 20 Year Warranty (PDF) (PDF - 74 Kb) Metal Edging & Gravel Stop - 1 
20-1-D Sure-Seal 1-Piece Gravel Stop (PDF) (PDF - 69 Kb) Metal Edging & Gravel Stop - 1 
A-1-D Metal Edge Termination (PDF) (PDF - 65 Kb) Metal Edging & Gravel Stop - 1 
A-1-F Carlisle SecurEdge 200 (PDF) (PDF - 77 Kb) Metal Edging & Gravel Stop - 1 
A-1-F Option 2 Carlisle SecurEdge 200 (PDF) (PDF - 81 Kb) Metal Edging & Gravel Stop - 1 
A-1-G Sure-Seal Drip Edge (PDF) (PDF - 64 Kb) Metal Edging & Gravel Stop - 1 
A-1-H Carlisle SecurEdge 2000 (PDF) (PDF - 47 Kb) Metal Edging & Gravel Stop - 1 
A-1-H Carlisle SecurEdge 2000 (PDF) (PDF - 43 Kb) Metal Edging & Gravel Stop - 1 
A-1-I Carlisle SecurEdge 3000 (PDF) (PDF - 44 Kb) Metal Edging & Gravel Stop - 1 
A-1-J Carlisle SecurEdge 1000 (PDF) (PDF - 43 Kb) Metal Edging & Gravel Stop - 1 
A-1-K Carlisle SecurEdge 300 (PDF) (PDF - 48 Kb) Metal Edging & Gravel Stop - 1 
A-14 One Way Pressure Relief Vent (PDF) (PDF - 40 Kb) Pipe Flashings - 14 
EPDM - Adhered - 30 yr. back to top
X3A-15A Inside Corner With Separate EPDM Wall Flashing (PDF) (PDF - 79 Kb) Corners - 15 
X3A-15A Inside Corner with Seperate EPDM Wall Flashing (PDF) (PDF - 79 Kb) Corners - 15 
X3A-15B Inside Corner with Continuous EPDM Wall Flashing (PDF) (PDF - 64 Kb) Corners - 15 
X3A-15B Inside Corner With Continuous EPDM Wall Flashing (PDF) (PDF - 64 Kb) Corners - 15 
X3A-15C Outside Corner with Pressure-Sensitive Uncured Flashing (PDF) (PDF - 77 Kb) Corners - 15 
X3A-15C Outside Corner with Pressure-Sensitive Uncured Flashing (PDF) (PDF - 77 Kb) Corners - 15 
X3A-5 Curb Flashing (PDF) (PDF - 49 Kb) Curb & Skylights - 5 
X3A-5 Curb Flashing (PDF) (PDF - 49 Kb) Curb & Skylights - 5 
X3A-3A Deck to Deck Expansion Joint (PDF) (PDF - 33 Kb) Expansion Joints - 3 
X3A-3A Deck to Deck Expansion Joint (PDF) (PDF - 33 Kb) Expansion Joints - 3 
X3A-3B Deck to Wall Expansion Joint (PDF) (PDF - 48 Kb) Expansion Joints - 3 
X3A-3B Deck to Wall Expansion Joint (PDF) (PDF - 48 Kb) Expansion Joints - 3 
X3A-27A 4' x 8' Insulation Securement (PDF) (PDF - 33 Kb) Insulation Attachment - 27 
X3A-27A 4' x 8' Insulation Securement (PDF) (PDF - 33 Kb) Insulation Attachment - 27 
X3A-27B 4' x 8' OSB Attachment (PDF) (PDF - 31 Kb) Insulation Attachment - 27 
X3A-27B 4' x 8' OSB Attachment (PDF) (PDF - 31 Kb) Insulation Attachment - 27 
X3A-E Fibrous Cement/ Gypsum Deck Attachment (PDF) (PDF - 65 Kb) Insulation Attachment - 27 
X3A-E Fibrous Cement/Gypsum Deck Attachment (PDF) (PDF - 65 Kb) Insulation Attachment - 27 
X3A-1A Carlisle SecurEdge (PDF) (PDF - 56 Kb) Metal Edging & Gravel Stop - 1 
X3A-1A Carlisle SecurEdge 200 (PDF) (PDF - 56 Kb) Metal Edging & Gravel Stop - 1 
X3A-1B Carlisle SecurEdge Anchor Bar Edging (PDF) (PDF - 32 Kb) Metal Edging & Gravel Stop - 1 
X3A-1B Carlisle SecurEdge Anchor Bar Edging (PDF) (PDF - 32 Kb) Metal Edging & Gravel Stop - 1 
X3A-1C Sure-Seal Drip Edge (PDF) (PDF - 66 Kb) Metal Edging & Gravel Stop - 1 
X3A-1D Metal Bar Termination (PDF) (PDF - 28 Kb) Metal Edging & Gravel Stop - 1 
X3A-1D Metal Bar Termination (PDF) (PDF - 28 Kb) Metal Edging & Gravel Stop - 1 
X3A-12A Parapet/Curb with Separate EPDM Membrane (PDF) (PDF - 57 Kb) Parapet & Curbs - 12 
X3A-12A Parapet/Curb with Separate EPDM Membrane (PDF) (PDF - 57 Kb) Parapet & Curbs - 12 
X3A-12B Wall Flashing with Continuous EPDM Membrane (PDF) (PDF - 45 Kb) Parapet & Curbs - 12 
X3A-12B Wall Flashing with Continuous EPDM Membrane (PDF) (PDF - 45 Kb) Parapet & Curbs - 12 
X3A-14A Field Fabricated Pipe Seal (PDF) (PDF - 50 Kb) Pipe Flashings - 14 
X3A-14A Field Fabricated Pipe Seal (PDF) (PDF - 50 Kb) Pipe Flashings - 14 
X3A-14B Flexible Penetration (PDF) (PDF - 122 Kb) Pipe Flashings - 14 
X3A-14B Flexible Penetration (PDF) (PDF - 122 Kb) Pipe Flashings - 14 
X3A-14C Field Fabricated Hot Stack (PDF) (PDF - 42 Kb) Pipe Flashings - 14 
X3A-14C Field Fabricated Hot Stack (PDF) (PDF - 42 Kb) Pipe Flashings - 14 
X3A-8 Sure-Seal Pressure-Sensitive Molded Pipe Seal (PDF) (PDF - 87 Kb) Pipes - 8 
X3A-16A Sure-Seal Pressure-Sensitive Pourable Sealer Pocket With Rain Hood (PDF) (PDF - 52 Kb) Pockets - 16 
X3A-16A Sure-Seal Pressure-Sensitive Pourable Sealer Pocket with Rain Hood (PDF) (PDF - 52 Kb) Pockets - 16 
X3A-16B Sure-Seal Pressure-Sensitive Pourable Sealer Pocket - Double (PDF) (PDF - 57 Kb) Pockets - 16 
X3A-16B Sure-Seal Pressure-Sensitive Pourable Sealer Pocket - Double (PDF) (PDF - 57 Kb) Pockets - 16 
X3A-16C Multiple Penetratins Curb Detail (PDF) (PDF - 37 Kb) Pockets - 16 
X3A-16C Multiple Penetrations Curb Detail (PDF) (PDF - 37 Kb) Pockets - 16 
X3A-A 55 MPH Wind Speed Assembly (Option #1) (PDF) (PDF - 35 Kb) Roof Assembly Options 
X3A-A 55 mph Wind Speed Assembly (option #1) (PDF) (PDF - 35 Kb) Roof Assembly Options 
X3A-B 55 mph Wind Speed Assembly (option #2) (PDF) (PDF - 30 Kb) Roof Assembly Options 
X3A-B 55 MPH Wind Speed Assembly (Option #2) (PDF) (PDF - 30 Kb) Roof Assembly Options 
X3A-C 72 MPH Wind Speed Assembly (PDF) (PDF - 28 Kb) Roof Assembly Options 
X3A-C 72 mph Wind Speed Assembly (PDF) (PDF - 28 Kb) Roof Assembly Options 
X3A-D 100 mph Wind Speed Assembly (PDF) (PDF - 31 Kb) Roof Assembly Options 
X3A-D 100 MPH Wind Speed Assembly (PDF) (PDF - 31 Kb) Roof Assembly Options 
X3A-2 Membrane Splice With SecurTAPE (PDF) (PDF - 53 Kb) Splices - 2 
X3A-2 Membrane Splice with SecurTAPE (PDF) (PDF - 53 Kb) Splices - 2 
X3A-9 Vertical Flashing Terminations (PDF) (PDF - 53 Kb) Terminations - 9 
X3A-9 Vertical Flashing Terminations (PDF) (PDF - 53 Kb) Terminations - 9 
EPDM - Mechanically Fastened back to top
MFS-6 Roof Drain with Sump (PDF) (PDF - 84 Kb) Drains - 6 
MFS-27-A Sure-Seal Insulation Attachment (PDF) (PDF - 62 Kb) Insulation Attachment - 27 
MFS-27-B Mechanical Attachment SS Polyiso Less Than 1.5" Thick (PDF) (PDF - 47 Kb) Insulation Attachment - 27 
MFS-27-C Sure-Seal Foamular Durpink or Dow Recovermate Attachment (PDF) (PDF - 51 Kb) Insulation Attachment - 27 
MFS-21-A Membrane Placement and Attachment (PDF) (PDF - 54 Kb) Membrane Attachment - 21 
MFS-21-C Alternate Membrane Attachment with Cure Membrane Flashing (PDF) (PDF - 46 Kb) Membrane Attachment - 21 
MFS-21-D Alternate Membrane Attachment with Pressure-Sensitive Flashing (PDF) (PDF - 84 Kb) Membrane Attachment - 21 
MFS-21-E Membrane Attachment with Pressure-Sensitive RUSS (PDF) (PDF - 71 Kb) Membrane Attachment - 21 
20-1-A Metal Drip Edge - 20 Year System Warranty (PDF) (PDF - 84 Kb) Metal Edging & Gravel Stop - 1 
20-1-B Metal Drip Edge/RUSS - 20 Year Warranty (PDF) (PDF - 70 Kb) Metal Edging & Gravel Stop - 1 
20-1-C Sure-Seal Drip Edge - 20 Year Warranty (PDF) (PDF - 74 Kb) Metal Edging & Gravel Stop - 1 
20-1-D Sure-Seal 1-Piece Gravel Stop (PDF) (PDF - 69 Kb) Metal Edging & Gravel Stop - 1 
MFS-1-F (option 2) Carlisle SecurEdge 200 (PDF) (PDF - 54 Kb) Metal Edging & Gravel Stop - 1 
MFS-1-F CARLISLE SECUREDGE 200 (PDF) (PDF - 50 Kb) Metal Edging & Gravel Stop - 1 
MFS-1-G SURE-SEAL DRIP EDGE (PDF) (PDF - 61 Kb) Metal Edging & Gravel Stop - 1 
MFS-1-G Sure-Seal Drip Edge (PDF) (PDF - 65 Kb) Metal Edging & Gravel Stop - 1 
MFS-1-H Carlisle SecurEdge 2000 (PDF) (PDF - 46 Kb) Metal Edging & Gravel Stop - 1 
MFS-1-H CARLISLE SECUREDGE 2000 (PDF) (PDF - 43 Kb) Metal Edging & Gravel Stop - 1 
MFS-1-I CARLISLE SECUREDGE 3000 (PDF) (PDF - 40 Kb) Metal Edging & Gravel Stop - 1 
MFS-1-I Carlisle SecurEdge 3000 (PDF) (PDF - 43 Kb) Metal Edging & Gravel Stop - 1 
MFS-1-J Carlisle SecurEdge 1000 (PDF) (PDF - 42 Kb) Metal Edging & Gravel Stop - 1 
MFS-1-J CARLISLE SECUREDGE 1000 (PDF) (PDF - 39 Kb) Metal Edging & Gravel Stop - 1 
MFS-1-K CARLISLE SECUREDGE 300 (PDF) (PDF - 47 Kb) Metal Edging & Gravel Stop - 1 
MFS-14 Field Fabricated Pipe Seal (PDF) (PDF - 61 Kb) Pipe Flashings - 14 
MFS-8-A Vent Pipe Flashing (PDF) (PDF - 87 Kb) Pipes - 8 
MFS-8-B Pressure-Sensitive Vent Pipe Flashing (PDF) (PDF - 84 Kb) Pipes - 8 
MFS-22-A Ridge Membrane Attachment (PDF) (PDF - 54 Kb) Ridge & Valley Attachment - 22 
MFS-22-B Ridge Membrane Attachment (PDF) (PDF - 51 Kb) Ridge & Valley Attachment - 22 
MFS-2-B Membrane Attachment at Tape Splice (PDF) (PDF - 62 Kb) Splices - 2 
MFS-2-C SecurTAPE Splice Intersection (PDF) (PDF - 99 Kb) Splices - 2 
EPDM - Metal Retrofit back to top
MR/E4.1 Mechanically Fastened System - Membrane Attachment with RUSS (PDF) (PDF - 49 Kb) Membrane Attachment - 21 
MR/E5.1 100 MPH or Less Wind Zones - Mechanically Fastened Systems (PDF) (PDF - 70 Kb) Membrane Attachment - 21 
MR/E5.1B 100 MPH (161 Km/Hour) or Less Wind Zones - Mechanically Fastened Systems (PDF) (PDF - 162 Kb) Membrane Attachment - 21 
MR/E5.2 101-120 MPH (163-193 Km/hour) Wind Zones - Mechanically Fastened System (PDF) (PDF - 72 Kb) Membrane Attachment - 21 
MR/E5.2A 101-120 MPH (163-193 Km/hour) Wind Zones - Mechanically Fastened System (PDF) (PDF - 148 Kb) Membrane Attachment - 21 
MR/E5.2B 101-120 MPH (163-193 Km/hour) Wind Zones - Mechanically Fastened System (PDF) (PDF - 128 Kb) Membrane Attachment - 21 
MR/E1.1 - Fascia Edge Detail With Pressure-Sensitive Cured Cover Strip (PDF) (PDF - 77 Kb) Metal Edging & Gravel Stop - 1 
MR/E1.4 Roof Edge Detail with Heavy Gauge Fascia Metal (PDF) (PDF - 52 Kb) Metal Edging & Gravel Stop - 1 
MR/E2.1 Gutter Edge Flashing (PDF) (PDF - 78 Kb) Metal Edging & Gravel Stop - 1 
MR/E3.1 Fascia Edge Detail- 3D Sheet Metal Insulation (PDF) (PDF - 84 Kb) Metal Edging & Gravel Stop - 1 
MR/E4.2Ridge Attachment Detail - Mechanically Fastened System (PDF) (PDF - 49 Kb) Ridge & Valley Attachment - 22 
EPDM - Ballasted & Rubber Paver back to top
WR-2 Stormwater Retention - Roof Drain (PDF) (PDF - 103 Kb) Drains - 6 
B-3-A & B Expansion Joints (PDF) (PDF - 44 Kb) Expansion Joints - 3 
20-1-D Sure-Seal 1-Piece Gravel Stop (PDF) (PDF - 69 Kb) Metal Edging & Gravel Stop - 1 
B-1-A Gravel Stop Termination (pdf) (PDF - 75 Kb) Metal Edging & Gravel Stop - 1 
B-1-E Carlisle SecurEdge 200 (pdf) (PDF - 44 Kb) Metal Edging & Gravel Stop - 1 
B-1-F Sure-Seal Ballast Retaining Bar (pdf) (PDF - 57 Kb) Metal Edging & Gravel Stop - 1 
B-1-G Carlisle SecurEdge 2000 (pdf) (PDF - 52 Kb) Metal Edging & Gravel Stop - 1 
B-1-H Carlisle SecurEdge 1000 (pdf) (PDF - 43 Kb) Metal Edging & Gravel Stop - 1 
B-1-I CARLISLE SECUREDGE 300 (PDF) (PDF - 49 Kb) Metal Edging & Gravel Stop - 1 
WR-1 Stormwater Retention - Parapet Wall (PDF) (PDF - 98 Kb) Parapet & Curbs - 12 
WR-3 Stormwater Retention - Interlocking Rubber Pavers (PDF) (PDF - 90 Kb) Rubber Pavers 
RP-12-A Paver Edge Securement (PDF) (PDF - 16 Kb) Rubber Pavers 
RP-12-B Paver Edge Securement (PDF) (PDF - 50 Kb) Rubber Pavers 
RP-2 Membrane Splice (PDF) (PDF - 17 Kb) Rubber Pavers 
RP-21 Cut Paver Securement (PDF) (PDF - 17 Kb) Rubber Pavers 
RP-27 Perimeter Insulation Securement (PDF) (PDF - 14 Kb) Rubber Pavers 
RP-4-A Paver Installation (PDF) (PDF - 78 Kb) Rubber Pavers 
RP-4-B Paver Installation (PDF) (PDF - 58 Kb) Rubber Pavers 
RP-4-C Paver Enhancements (PDF) (PDF - 20 Kb) Rubber Pavers 
RP-6 Roof Drain (PDF) (PDF - 32 Kb) Rubber Pavers 
WR-4 Stormwater Retention - Concrete Pavers (PDF) (PDF - 110 Kb) Walkways 
EPDM - Universal back to top
U-15-A Option #1 - Inside Corner Separate EPDM Wall Flashing (PDF) (PDF - 47 Kb) Corners - 15 
U-15-A Option #2 - Inside Corner Separate EPDM Wall Flashing (PDF) (PDF - 49 Kb) Corners - 15 
U-15-B Inside Corner Continuous EPDM Wall Flashing (PDF) (PDF - 58 Kb) Corners - 15 
U-15-C Option #1 - Outside Corner Uncured Elastoform Flashing (PDF) (PDF - 50 Kb) Corners - 15 
U-15-C Option #2 - Outside Corner With Uncured Elastoform Flashing (PDF) (PDF - 72 Kb) Corners - 15 
U-15-D Option #1 - Inside Corner Continuous EPDM Wall Flashing With RUSS (PDF) (PDF - 64 Kb) Corners - 15 
U-15-D OPTION #2 - INSIDE CORNER CONTINUOUS EPDM WALL FLASHING WITH RUSS (PDF) (PDF - 67 Kb) Corners - 15 
U-5-A Curb Flashing (Adhered & Ballasted Systems Only) (PDF) (PDF - 68 Kb) Curb & Skylights - 5 
U-5-B Curb Flashing - Option #1 (PDF) (PDF - 55 Kb) Curb & Skylights - 5 
U-5-B Pressure-Sensitive Curb Flashing- Option #2 (PDF) (PDF - 54 Kb) Curb & Skylights - 5 
U-5-C New Self-Flashing Metal Curb (PDF) (PDF - 47 Kb) Curb & Skylights - 5 
U-5-D Self-Flashing Curb (PDF) (PDF - 48 Kb) Curb & Skylights - 5 
U-6-B Roof Drain (PDF) (PDF - 60 Kb) Drains - 6 
U-6-D Sure-Seal Insert Drain (PDF) (PDF - 74 Kb) Drains - 6 
U-6-E Sure-Seal Add-On Roof Drain (PDF) (PDF - 68 Kb) Drains - 6 
U-3-E Option #1 - Shear/Expansion Cover (RUSS) (PDF) (PDF - 55 Kb) Expansion Joints - 3 
U-3-E Option #2 - Shear & Expansion Cover (PDF) (PDF - 60 Kb) Expansion Joints - 3 
U-3-F Deck-to-Deck Expansion Joint (RUSS) (PDF) (PDF - 54 Kb) Expansion Joints - 3 
U-3-G Deck-to-Wall Expansion Joint (RUSS) (PDF) (PDF - 61 Kb) Expansion Joints - 3 
U-20-A Lightning Rod at Parapet (PDF) (PDF - 35 Kb) Lightning Rods - 20 
U-20-B Lightning Rod at Deck Level (PDF) (PDF - 32 Kb) Lightning Rods - 20 
U-20-C Lightning Rod at Deck Level With SecurTape (PDF) (PDF - 47 Kb) Lightning Rods - 20 
U-1-A Metal Edge Termination with Cured EPDM Flashing (PDF) (PDF - 51 Kb) Metal Edging & Gravel Stop - 1 
U-1-C Metal Bar Termination (PDF) (PDF - 42 Kb) Metal Edging & Gravel Stop - 1 
U-12-A Parapet/Curb Cured EPDM (PDF) (PDF - 63 Kb) Parapet & Curbs - 12 
U-12-C Parapet Curb With RUSS (Horizontal) (PDF) (PDF - 67 Kb) Parapet & Curbs - 12 
U-12-D Parapet/Curb With RUSS (Vertical) (PDF) (PDF - 58 Kb) Parapet & Curbs - 12 
U-30 I-Beam Penetration (PDF) (PDF - 47 Kb) Penetration - 30 
U-14-A Field Fabricated Pipe Seal (PDF) (PDF - 45 Kb) Pipe Flashings - 14 
U-14-B Field-Fabricated New Hot Stack (PDF) (PDF - 45 Kb) Pipe Flashings - 14 
U-14-C Field Fabricated Existing Hot Stack (PDF) (PDF - 50 Kb) Pipe Flashings - 14 
U-14-D Structural Steel Tubing (PDF) (PDF - 54 Kb) Pipe Flashings - 14 
U-14-E Flexible Penetration (PDF) (PDF - 114 Kb) Pipe Flashings - 14 
U-16-A Field Fabricated Pourable Sealer Pocket - 12" Wide or Less (PDF) (PDF - 75 Kb) Pockets - 16 
U-16-B Field Fabricated Pourable Sealer Pocket - Greater Than 12" Wide (PDF) (PDF - 75 Kb) Pockets - 16 
U-16-D Extended Pourable Sealer Pocket (PDF) (PDF - 69 Kb) Pockets - 16 
U-22 Valley (PDF) (PDF - 42 Kb) Ridge & Valley Attachment - 22 
U-18-B Scupper Through Deck (PDF) (PDF - 49 Kb) Scuppers - 18 
U-18-C Overflow Metal Scupper (PDF) (PDF - 51 Kb) Scuppers - 18 
U-18-E Metal Scupper at Deck (PDF) (PDF - 47 Kb) Scuppers - 18 
U-24 Sleeper (PDF) (PDF - 30 Kb) Sleeper - 24 
U-2-A Membrane Splice with Splicing Cement (Adhered & Ballasted Systems Only) (PDF) (PDF - 62 Kb) Splices - 2 
U-2-B Membrane Splice With SecurTape (PDF) (PDF - 60 Kb) Splices - 2 
U-2-C SecurTape Splice Intersection (PDF) (PDF - 96 Kb) Splices - 2 
U-9-A Reglet Termination (PDF) (PDF - 26 Kb) Terminations - 9 
U-9-B Cap Flashing Termination (PDF) (PDF - 24 Kb) Terminations - 9 
U-9-C Counterflashing Termination (PDF) (PDF - 35 Kb) Terminations - 9 
U-9-D Mechanical Termination (PDF) (PDF - 39 Kb) Terminations - 9 
U-9-E Coping Stone Termination (PDF) (PDF - 23 Kb) Terminations - 9 
U-9-H Counterflashing Termination (PDF) (PDF - 47 Kb) Terminations - 9 
U-9-I Metal Coping (PDF) (PDF - 48 Kb) Terminations - 9 
U-9-J Mechanical Termination at Vertical Joint (PDF) (PDF - 62 Kb) Terminations - 9 
U-13 Option #1 - Built-Up Roofing Hot Tie-In (PDF) (PDF - 51 Kb) Tie-Ins (BUR & EPDM) - 13 
U-13 Option #2 - Built-Up Roofing Cold Tie-In (PDF) (PDF - 38 Kb) Tie-Ins (BUR & EPDM) - 13 
U-13-B Built-Up Roofing Tie-In Sloped Away From Carlisle (Tear Off) (PDF) (PDF - 53 Kb) Tie-Ins (BUR & EPDM) - 13 
U-13-C Built-Up Roof Tie-In Sloped Toward Carlisle Roof (PDF) (PDF - 68 Kb) Tie-Ins (BUR & EPDM) - 13 
U-13-D Built-Up Roof Tie-In (Steel Deck Slope is Level or Toward Carlisle Roofing System) (PDF) (PDF - 62 Kb) Tie-Ins (BUR & EPDM) - 13 
U-13-E EPDM Tie-In (Steel Deck Slope is Level or Toward Carlisle Roofing System) (PDF) (PDF - 77 Kb) Tie-Ins (BUR & EPDM) - 13 
U-13-F EPDM Tie-In (Concrete Deck Slope is Level or Toward Carlisle Roofing System) (PDF) (PDF - 71 Kb) Tie-Ins (BUR & EPDM) - 13 
U-10-A New Carlisle Design "B" and Design "A" Tie-In (PDF) (PDF - 48 Kb) Tie-Ins (EPDM to EPDM) - 10 
U-10-B New Carlisle Design "B" and Mechanically Fastened Tie-In (PDF) (PDF - 56 Kb) Tie-Ins (EPDM to EPDM) - 10 
U-19-A Tie-In Shingled Roof (PDF) (PDF - 40 Kb) Tie-Ins (Shingles) - 19 
EPDM - Universal Pressure-Sensitive back to top
PS-15-E SURE-SEAL PRESSURE SENSITIVE INSIDE CORNER WITH CURED MEMBRANE (PDF) (PDF - 65 Kb) Corners - 15 
PS-15-E SURE-SEAL PRESSURE-SENSITIVE INSIDE CORNER WITH CURED MEMBRANE (PDF) (PDF - 65 Kb) Corners - 15 
PS-15-E SURE-SEAL PRESSURE-SENSITIVE INSIDE CORNER WITH CURED MEMBRANE (PDF) (PDF - 65 Kb) Corners - 15 
PS-15-F SURE-SEAL PRESSURE SENSITIVE OUTSIDE CORNER WITH CURED MEMBRANE (PDF) (PDF - 73 Kb) Corners - 15 
PS-15-F SURE-SEAL PRESSURE-SENSITIVE OUTSIDE CORNER WITH CURED MEMBRANE (PDF) (PDF - 73 Kb) Corners - 15 
PS-15-F SURE-SEAL PRESSURE-SENSITIVE OUTSIDE CORNER WITH CURED MEMBRANE (PDF) (PDF - 73 Kb) Corners - 15 
PS-3-F Deck-to-Deck Expansion Joint (PDF) (PDF - 83 Kb) Expansion Joints - 3 
PS-3-F DECK-TO-DECK EXPANSION JOINT WITH PRESSURE-SENSITIVE FLASHING (PDF) (PDF - 80 Kb) Expansion Joints - 3 
PS-3-G Deck-to-Wall Expansion Joint (PDF) (PDF - 71 Kb) Expansion Joints - 3 
PS-1-A Option #1 and #2 - Metal Edging Termination with Pressure-Sensitive Flashing (PDF) (PDF - 93 Kb) Metal Edging & Gravel Stop - 1 
PS-12-B Parapet/Curb Continuous EPDM (PDF) (PDF - 65 Kb) Parapet & Curbs - 12 
PS-12-C Wall Flashing With Pressure-Sensitive RUSS (PDF) (PDF - 78 Kb) Parapet & Curbs - 12 
PS-12-D Wall Flashing With Pressure-Sensitive RUSS (PDF) (PDF - 66 Kb) Parapet & Curbs - 12 
PS-8-C Pre-Molded Pressure-Sensitive Pipe Seal (PDF) (PDF - 55 Kb) Pipes - 8 
PS-8-D Sure-Seal/Sure-White Pre-Molded Pressure-Sensitive Pipe Seal (PDF) (PDF - 51 Kb) Pipes - 8 
PS-16-F Sure-Seal Pressure-Sensitive Pourable Sealer Pocket (PDF) (PDF - 73 Kb) Pockets - 16 
TPO - Adhered back to top
SW-15A Inside Corner Flashing (pdf) (PDF - 48 Kb) Corners - 15 
SW-15B Inside Corner Fabrication (pdf) (PDF - 43 Kb) Corners - 15 
SW-15C Pre-Molded Outside Corner (pdf) (PDF - 44 Kb) Corners - 15 
SW-15D Field Fabricated Outside Corner (pdf) (PDF - 43 Kb) Corners - 15 
SW-15E Inside Corner/Pressure-Sensitive RUSS (PDF) (PDF - 85 Kb) Corners - 15 
SW-15F INSIDE CORNER WITH COATED METAL WALL FLASHING (PDF) (PDF - 65 Kb) Corners - 15 
SW-5A Curb Flashing (PDF) (PDF - 65 Kb) Curb & Skylights - 5 
SW-5B Pre-Fabricated TPO Curb Wrap Corner (PDF) (PDF - 67 Kb) Curb & Skylights - 5 
SW-5C Coated Metal Curb Flashing (PDF) (PDF - 52 Kb) Curb & Skylights - 5 
SW-6A Roof Drain (Drain Sump Less Than 3 Inches to One Horizontal Foot) (pdf) (PDF - 63 Kb) Drains - 6 
SW-6B Roof Drain (Drain Sump Greater Than 3 Inches to One Horizontal Foot) (PDF) (PDF - 62 Kb) Drains - 6 
SW-6C Roof Drain (With Tapered Insulation) Page 2 of 2 (PDF) (PDF - 75 Kb) Drains - 6 
SW-6C Roof Drain (With Tapered Insulation) Pg 1 of 2 (PDF) (PDF - 52 Kb) Drains - 6 
SWA-6 Roof Drain (Drain Sump Greater Than 3 Inches to One Horizontal Foot) For Adhered Systems (PDF) (PDF - 106 Kb) Drains - 6 
SW-3A Expansion Joint Deck to Deck (pdf) (PDF - 50 Kb) Expansion Joints - 3 
SW-3B Expansion Joint at Junction of Deck and Wall (pdf) (PDF - 57 Kb) Expansion Joints - 3 
SWA-27A Carlisle Insulation Attachment (For Adhered Only) (pdf) (PDF - 36 Kb) Insulation Attachment - 27 
SWA-27B 2 Inch Minimum Carlisle Polyisocyanurate Insulation Attachment (PDF) (PDF - 35 Kb) Insulation Attachment - 27 
SWA-27C OSB ATTACHMENT (PDF) (PDF - 35 Kb) Insulation Attachment - 27 
SWA-27D MINIMUM 1-1/2" (40 mm) THICK CARLISLE POLYISOCYANURATE INSULATION ATTACHMENT (pdf) (PDF - 39 Kb) Insulation Attachment - 27 
SWA-27E CARLISLE INSULATION FOR REROOF / NO TEAR-OFF PROJECTS (pdf) (PDF - 48 Kb) Insulation Attachment - 27 
SWA-27F 1/4" OR 1/2" THICK DENS-DECK PRIME (pdf) (PDF - 27 Kb) Insulation Attachment - 27 
SW-20 Lightning Rod Attachment (pdf) (PDF - 45 Kb) Lightning Rods - 20 
SW-1A Carlisle SecurEdge 2000 (pdf) (PDF - 39 Kb) Metal Edging & Gravel Stop - 1 
SW-1B Carlisle SecurEdge 200 (pdf) (PDF - 44 Kb) Metal Edging & Gravel Stop - 1 
SW-1C Metal Bar Edge Termination (PDF) (PDF - 35 Kb) Metal Edging & Gravel Stop - 1 
SW-1D Coated Metal Drip Edge (pdf) (PDF - 69 Kb) Metal Edging & Gravel Stop - 1 
SW-1E Metal Edge with Pressure-Sensitive Cover Strip (pdf) (PDF - 34 Kb) Metal Edging & Gravel Stop - 1 
SW-1F CARLISLE SECUREDGE 3000 (PDF) (PDF - 38 Kb) Metal Edging & Gravel Stop - 1 
SW-1G CARLISLE SECUREDGE 1000 (PDF) (PDF - 37 Kb) Metal Edging & Gravel Stop - 1 
SW-1H Carlisle SecurEdge 300 (PDF) (PDF - 43 Kb) Metal Edging & Gravel Stop - 1 
SW-12A Parapet Flashings (PDF) (PDF - 57 Kb) Parapet & Curbs - 12 
SW-12B Wall Flashing/Pressure-Sensitive RUSS (PDF) (PDF - 69 Kb) Parapet & Curbs - 12 
SW-12C Coated Metal Wall Flashing (PDF) (PDF - 55 Kb) Parapet & Curbs - 12 
SW-8B Field Fabricated Pipe Flashings (PDF) (PDF - 66 Kb) Pipe Flashings - 14 
SW-8C Field Fabricated Hot Pipe (PDF) (PDF - 49 Kb) Pipe Flashings - 14 
SW-8E Field Fabricated Square Tube Flashing (PDF) (PDF - 65 Kb) Pipe Flashings - 14 
SW-8A Sure-Weld Pre-Molded Pipe Flashing (pdf) (PDF - 79 Kb) Pipes - 8 
SW-8D Sure-Weld TPO Split Pipe Seal (PDF) (PDF - 65 Kb) Pipes - 8 
SW-8F Square Tubing Wrap (PDF) (PDF - 78 Kb) Pipes - 8 
SWA-8 ONE-WAY AIR PRESSURE RELIEF VENT (pdf) (PDF - 60 Kb) Pipes - 8 
SW-16B Molded TPO Sealant Pocket (PDF) (PDF - 87 Kb) Pockets - 16 
SW-16C TPO Pre-Fabricated Sealant Pocket (PDF) (PDF - 90 Kb) Pockets - 16 
SW-18A Scupper at Deck (pdf) (PDF - 61 Kb) Scuppers - 18 
SW-18B Scupper with Coated Metal (pdf) (PDF - 56 Kb) Scuppers - 18 
SWA-2 Lap Cross Section (for Adhered only) (PDF) (PDF - 28 Kb) Splices - 2 
SWA-2A Splice Intersection With 60-Mil Membrane (for Adhered only) (PDF) (PDF - 41 Kb) Splices - 2 
SW-9 Flashing Terminations (PDF) (PDF - 82 Kb) Terminations - 9 
SW-13A Built-Up Roof Tie-In/Steel Deck (PDF) (PDF - 58 Kb) Tie-Ins (BUR & EPDM) - 13 
SW-13B BUR Tie-In Sloped Toward Sure-Weld/Concrete Deck (PDF) (PDF - 63 Kb) Tie-Ins (BUR & EPDM) - 13 
SW-13C Carlisle EPDM/Hypalon Tie-In (PDF) (PDF - 52 Kb) Tie-Ins (BUR & EPDM) - 13 
TPO - Mechanically Fastened back to top
SW-15A Inside Corner Flashing (pdf) (PDF - 48 Kb) Corners - 15 
SW-15B Inside Corner Fabrication (pdf) (PDF - 43 Kb) Corners - 15 
SW-15C Pre-Molded Outside Corner (pdf) (PDF - 44 Kb) Corners - 15 
SW-15D Field Fabricated Outside Corner (pdf) (PDF - 43 Kb) Corners - 15 
SW-15E Inside Corner/Pressure-Sensitive RUSS (PDF) (PDF - 85 Kb) Corners - 15 
SW-15F INSIDE CORNER WITH COATED METAL WALL FLASHING (PDF) (PDF - 65 Kb) Corners - 15 
SW-5A Curb Flashing (PDF) (PDF - 65 Kb) Curb & Skylights - 5 
SW-5B Pre-Fabricated TPO Curb Wrap Corner (PDF) (PDF - 67 Kb) Curb & Skylights - 5 
SW-5C Coated Metal Curb Flashing (PDF) (PDF - 52 Kb) Curb & Skylights - 5 
SW-6A Roof Drain (Drain Sump Less Than 3 Inches to One Horizontal Foot) (pdf) (PDF - 63 Kb) Drains - 6 
SW-6B Roof Drain (Drain Sump Greater Than 3 Inches to One Horizontal Foot) (PDF) (PDF - 62 Kb) Drains - 6 
SW-6C Roof Drain (With Tapered Insulation) Page 2 of 2 (PDF) (PDF - 75 Kb) Drains - 6 
SW-6C Roof Drain (With Tapered Insulation) Pg 1 of 2 (PDF) (PDF - 52 Kb) Drains - 6 
SW-3A Expansion Joint Deck to Deck (pdf) (PDF - 50 Kb) Expansion Joints - 3 
SW-3B Expansion Joint at Junction of Deck and Wall (pdf) (PDF - 57 Kb) Expansion Joints - 3 
SWMF-27A CARLISLE INSULATION ATTACHMENT (pdf) (PDF - 45 Kb) Insulation Attachment - 27 
SWMF-27B FOAMULAR /DOW INSULATION ATTACHMENT (pdf) (PDF - 40 Kb) Insulation Attachment - 27 
SW-20 Lightning Rod Attachment (pdf) (PDF - 45 Kb) Lightning Rods - 20 
SW-1A Carlisle SecurEdge 2000 (pdf) (PDF - 39 Kb) Metal Edging & Gravel Stop - 1 
SW-1B Carlisle SecurEdge 200 (pdf) (PDF - 44 Kb) Metal Edging & Gravel Stop - 1 
SW-1C Metal Bar Edge Termination (PDF) (PDF - 35 Kb) Metal Edging & Gravel Stop - 1 
SW-1D Coated Metal Drip Edge (pdf) (PDF - 69 Kb) Metal Edging & Gravel Stop - 1 
SW-1E Metal Edge with Pressure-Sensitive Cover Strip (pdf) (PDF - 34 Kb) Metal Edging & Gravel Stop - 1 
SW-1F CARLISLE SECUREDGE 3000 (PDF) (PDF - 38 Kb) Metal Edging & Gravel Stop - 1 
SW-1G CARLISLE SECUREDGE 1000 (PDF) (PDF - 37 Kb) Metal Edging & Gravel Stop - 1 
SW-12B Wall Flashing/Pressure-Sensitive RUSS (PDF) (PDF - 69 Kb) Parapet & Curbs - 12 
SW-12C Coated Metal Wall Flashing (PDF) (PDF - 55 Kb) Parapet & Curbs - 12 
SW-8B Field Fabricated Pipe Flashings (PDF) (PDF - 66 Kb) Pipe Flashings - 14 
SW-8C Field Fabricated Hot Pipe (PDF) (PDF - 49 Kb) Pipe Flashings - 14 
SW-8E Field Fabricated Square Tube Flashing (PDF) (PDF - 65 Kb) Pipe Flashings - 14 
SW-8A Sure-Weld Pre-Molded Pipe Flashing (pdf) (PDF - 79 Kb) Pipes - 8 
SW-8D Sure-Weld TPO Split Pipe Seal (PDF) (PDF - 65 Kb) Pipes - 8 
SW-8F Square Tubing Wrap (PDF) (PDF - 78 Kb) Pipes - 8 
SW-16B Molded TPO Sealant Pocket (PDF) (PDF - 87 Kb) Pockets - 16 
SW-16C TPO Pre-Fabricated Sealant Pocket (PDF) (PDF - 90 Kb) Pockets - 16 
SWMF-22 Ridge Membrane Attachment (PDF) (PDF - 49 Kb) Ridge & Valley Attachment - 22 
SW-18A Scupper at Deck (pdf) (PDF - 61 Kb) Scuppers - 18 
SW-18B Scupper with Coated Metal (pdf) (PDF - 56 Kb) Scuppers - 18 
SWMF-2 Membrane Securement Option 1 (pdf) (PDF - 58 Kb) Splices - 2 
SWMF-2 Membrane Securement with Pressure-Sensitive RUSS Option 2 (PDF) (PDF - 68 Kb) Splices - 2 
SWMF-2A Lap Cross Section (pdf) (PDF - 39 Kb) Splices - 2 
SWMF-2B Plate and Fastener Placement (PDF) (PDF - 41 Kb) Splices - 2 
SWMF-2C End Lap Cross Section (PDF) (PDF - 29 Kb) Splices - 2 
SWMF-2D Splice Intersection With .060" Membrane (PDF) (PDF - 44 Kb) Splices - 2 
SW-9 Flashing Terminations (PDF) (PDF - 82 Kb) Terminations - 9 
SW-13A Built-Up Roof Tie-In/Steel Deck (PDF) (PDF - 58 Kb) Tie-Ins (BUR & EPDM) - 13 
SW-13B BUR Tie-In Sloped Toward Sure-Weld/Concrete Deck (PDF) (PDF - 63 Kb) Tie-Ins (BUR & EPDM) - 13 
SW-13C Carlisle EPDM/Hypalon Tie-In (PDF) (PDF - 52 Kb) Tie-Ins (BUR & EPDM) - 13 
TPO - Metal Retrofit back to top
MR/T4.1 Mechanically Fastened System & Membrane Attachment with RUSS (PDF) (PDF - 49 Kb) Membrane Attachment - 21 
MR/T5.1 100 MPH or Less Wind Zones - Mechanically Fastened System (PDF) (PDF - 62 Kb) Membrane Attachment - 21 
MR/T5.1A 100 MPH or Less Wind Zones - Mechanically Fastened System (PDF) (PDF - 116 Kb) Membrane Attachment - 21 
MR/T5.1B 100 MPH or Less Wind Zones - Mechanically Fastened System (PDF) (PDF - 124 Kb) Membrane Attachment - 21 
MR/T5.2 101-120 MPH (163-193 Km/hour) Wind Zones - Mechanically Fastened System (PDF) (PDF - 59 Kb) Membrane Attachment - 21 
MR/T5.2A 101-120 MPH (163-193 Km/hour) Wind Zones - Mechanically Fastened System (PDF) (PDF - 111 Kb) Membrane Attachment - 21 
MR/T5.2B 101-120 MPH (163-193 Km/hour) Wind Zones - Mechanically Fastened System (PDF) (PDF - 122 Kb) Membrane Attachment - 21 
MR/R3.1 Carliske Coated Metal - ANSI/SPRI ES-1 Compliant Fascia & Cleat Details (PDF) (PDF - 58 Kb) Metal Edging & Gravel Stop - 1 
MR/T1.1 Fascia - Coated Metal (PDF) (PDF - 81 Kb) Metal Edging & Gravel Stop - 1 
MR/T1.2 Fascia Edge Detail with TPO Pressure-Sensitive Cover Strip (PDF) (PDF - 68 Kb) Metal Edging & Gravel Stop - 1 
MR/T2.1 Gutter Edge Flashing (PDF) (PDF - 62 Kb) Metal Edging & Gravel Stop - 1 
MR/T4.2 Ridge Attachment Detail - Mechanically Fastened System (PDF) (PDF - 61 Kb) Ridge & Valley Attachment - 22 
PVC - Adhered back to top
Universal 15A - Pre-Molded Inside Corner Flashing (PDF) (PDF - 31 Kb) Corners - 15 
Universal 15A - Pre-Molded Inside Corner Flashing (PDF) (PDF - 31 Kb) Corners - 15 
Universal 15B - Field Fabricated Inside Corner (PDF) (PDF - 33 Kb) Corners - 15 
Universal 15B - Field Fabricated Inside Corner (PDF) (PDF - 33 Kb) Corners - 15 
Universal 15C - Pre-Molded Outside Corner (PDF) (PDF - 28 Kb) Corners - 15 
Universal 15C - Pre-Molded Outside Corner (PDF) (PDF - 28 Kb) Corners - 15 
Universal 15D - Field Fabricated Outside Corner (PDF) (PDF - 30 Kb) Corners - 15 
Universal 15D - Field Fabricated Outside Corner (PDF) (PDF - 30 Kb) Corners - 15 
Universal 15E - Inside Corner with Coated Metal Wall Flashing (PDF) (PDF - 42 Kb) Corners - 15 
Universal 15E - Inside Corner with Coated Metal Wall Flashing (PDF) (PDF - 42 Kb) Corners - 15 
Universal 15F - Pre-Molded outside Corner With Coated Metal Wall Flashing (PDF) (PDF - 31 Kb) Corners - 15 
Universal 15F - Pre-Molded Outside Corner with Coated Metal Wall Flashing (PDF) (PDF - 31 Kb) Corners - 15 
Universal 5A - Curb Flashing (PDF) (PDF - 32 Kb) Curb & Skylights - 5 
Universal 5A - Curb Flashing (PDF) (PDF - 32 Kb) Curb & Skylights - 5 
Universal 5B - Coated Metal Curb Flashing (PDF) (PDF - 37 Kb) Curb & Skylights - 5 
Universal 5B - Coated Metal Curb Flashing (PDF) (PDF - 37 Kb) Curb & Skylights - 5 
Adhered 6 - Roof Drain - Sump Greater than 3" to 1 Horizontal Foot (PDF) (PDF - 68 Kb) Drains - 6 
SFA-6 Roof Drain (Drain Sump Greater than 3 Inches to 1 Horizontal Foot) (PDF) (PDF - 68 Kb) Drains - 6 
Universal 6A - Roof Drain (PDF) (PDF - 39 Kb) Drains - 6 
Universal 6A - Roof Drain (PDF) (PDF - 39 Kb) Drains - 6 
Universal 6B - Roof Drain (Drain Sump Greater than 3 Inches to 1 Horizontal Foot) (PDF) (PDF - 35 Kb) Drains - 6 
Universal 6B - Roof Drain, Sump Greater Than 3" to 1 Horizontal Foot (PDF) (PDF - 35 Kb) Drains - 6 
Universal 6C - Roof Drain Page 1 of 2 (PDF) (PDF - 33 Kb) Drains - 6 
Universal 6C - Roof Drain Page 2 of 2 (PDF) (PDF - 52 Kb) Drains - 6 
Universal 6C - Roof Drain, Page 1 of 2 (PDF) (PDF - 33 Kb) Drains - 6 
Universal 6C - Roof Drain, Page 2 of 2 (PDF) (PDF - 52 Kb) Drains - 6 
Universal 3A - Expansion Joint Deck to Deck (PDF) (PDF - 37 Kb) Expansion Joints - 3 
Universal 3A - Expansion Joint Deck to Deck (PDF) (PDF - 37 Kb) Expansion Joints - 3 
Universal 3B - Expansion Joint at Junction of Deck and Wall (PDF) (PDF - 35 Kb) Expansion Joints - 3 
Universal 3B - Expansion Joint at Junction of Deck to Wall (PDF) (PDF - 35 Kb) Expansion Joints - 3 
Adhered 27A - Carlisle Insulation Attachment (PDF) (PDF - 25 Kb) Insulation Attachment - 27 
Adhered 27B - 2" Min. Carlisle Polyiso Insulation Attachment (PDF) (PDF - 22 Kb) Insulation Attachment - 27 
Adhered 27C - OSB Attachment (PDF) (PDF - 24 Kb) Insulation Attachment - 27 
Adhered 27D - Min. 1-1/2" Thick Carlisle Polyiso Insulation Attachment (PDF) (PDF - 26 Kb) Insulation Attachment - 27 
Adhered 27E - Carlisle Insulation for Reroof/No Tearoff Projects (PDF) (PDF - 29 Kb) Insulation Attachment - 27 
SFA-27A Carlisle Insulation Attachment (PDF) (PDF - 25 Kb) Insulation Attachment - 27 
SFA-27B 2" (50 mm) Min. Carlisle Polyisocyanurate Insulation Attachment (PDF) (PDF - 22 Kb) Insulation Attachment - 27 
SFA-27C OSB Attachment (PDF) (PDF - 24 Kb) Insulation Attachment - 27 
SFA-27D Minimum 1-1/2" (40mm) Thick Carlisle Polyisocyanurate Insulation Attachment (PDF) (PDF - 26 Kb) Insulation Attachment - 27 
SFA-27E Carlisle Insulation for Reroof/No Tear-Off Projects (PDF) (PDF - 29 Kb) Insulation Attachment - 27 
SFA-27F 1/4" or 1/2" Thick Dens Deck Prime (PDF) (PDF - 21 Kb) Insulation Attachment - 27 
PVC Coated Metal Fabrication for ES-1 Compliance (PDF) (PDF - 37 Kb) Metal Edging & Gravel Stop - 1 
Universal 1A - Carlisle SecurEdge Anchor Bar Edging (PDF) (PDF - 32 Kb) Metal Edging & Gravel Stop - 1 
Universal 1A- Carlisle SecurEdge Anchor Bar Edging (PDF) (PDF - 32 Kb) Metal Edging & Gravel Stop - 1 
Universal 1B - Carlisle SecurEdge 200 Option 2 (PDF) (PDF - 31 Kb) Metal Edging & Gravel Stop - 1 
Universal 1B - Carlisle SecurEdge Option 1 (PDF) (PDF - 30 Kb) Metal Edging & Gravel Stop - 1 
Universal 1B - Option 2 - Carlisle SecurEdge 200 (PDF) (PDF - 31 Kb) Metal Edging & Gravel Stop - 1 
Universal 1C - Metal Bar Edge Termination (PDF) (PDF - 25 Kb) Metal Edging & Gravel Stop - 1 
Universal 1C - Metal Bar Termination (PDF) (PDF - 25 Kb) Metal Edging & Gravel Stop - 1 
Universal 1D - Coated Metal Drip Edge (PDF) (PDF - 60 Kb) Metal Edging & Gravel Stop - 1 
Universal 1D - Coated Metal Drip Edge (PDF) (PDF - 60 Kb) Metal Edging & Gravel Stop - 1 
Universal 12A - Parapet Flashing (PDF) (PDF - 34 Kb) Parapet & Curbs - 12 
Universal 12A - Parapet Flashing (PDF) (PDF - 34 Kb) Parapet & Curbs - 12 
Universal 12B - Coated Metal Wall Flashing (PDF) (PDF - 39 Kb) Parapet & Curbs - 12 
Universal 12B - Coated Metal Wall Flashing (PDF) (PDF - 39 Kb) Parapet & Curbs - 12 
Universal 12C - Parapet Flashing Greater Than 48" - Vertical Securement Option (PDF) (PDF - 37 Kb) Parapet & Curbs - 12 
Universal 12D - Parapet Flashing Greater Than 48" - Horizontal Securement Option (PDF) (PDF - 37 Kb) Parapet & Curbs - 12 
Universal 12E - Parapet Flashing - No Adhesion - Any Height (PDF) (PDF - 32 Kb) Parapet & Curbs - 12 
Universal 8B - Field Fabricated Pipe Flashing (PDF) (PDF - 38 Kb) Pipe Flashings - 14 
Universal 8B - Field Fabricated Pipe Flashing (PDF) (PDF - 38 Kb) Pipe Flashings - 14 
Universal 8C - Field Fabricated Hot Pipe (PDF) (PDF - 33 Kb) Pipe Flashings - 14 
Universal 8C Field Fabricated Hot Pipe (PDF) (PDF - 33 Kb) Pipe Flashings - 14 
Universal 8A - Pre-Molded Pipe Flashing (PDF) (PDF - 41 Kb) Pipes - 8 
Universal 8A - Sure-Flex Pre-Molded Pipe Flashing (PDF) (PDF - 41 Kb) Pipes - 8 
Universal 16 - Molded Sealant Pocket (PDF) (PDF - 46 Kb) Pockets - 16 
Universal 16 - Molded Sealant Pocket (PDF) (PDF - 46 Kb) Pockets - 16 
Universal 18 - Scupper With Coated Metal (PDF) (PDF - 44 Kb) Scuppers - 18 
Universal 18 - Scupper with Coated Metal (PDF) (PDF - 44 Kb) Scuppers - 18 
Adhered 2 - Splice Intersection With .060" or .080" Thick Membrane (PDF) (PDF - 25 Kb) Splices - 2 
SFA-2 Splice Intersection with .060" or .080" Thick Membrane (PDF) (PDF - 25 Kb) Splices - 2 
Universal 2 - Lap Cross Section (PDF) (PDF - 23 Kb) Splices - 2 
Universal 2 - Lap Cross Section (PDF) (PDF - 23 Kb) Splices - 2 
Universal 9 - Flashing Terminations (PDF) (PDF - 44 Kb) Terminations - 9 
Universal 9 - Flashing Terminations (PDF) (PDF - 44 Kb) Terminations - 9 
Universal 13 - Tie-In to Existing Single-Ply (PDF) (PDF - 33 Kb) Tie-Ins (BUR & EPDM) - 13 
Universal 13 - Tie-In to Existing Single-Ply (PDF) (PDF - 33 Kb) Tie-Ins (BUR & EPDM) - 13 
PVC - Mechanically Fastened back to top
Universal 15A - Pre-Molded Inside Corner Flashing (PDF) (PDF - 31 Kb) Corners - 15 
Universal 15A - Pre-Molded Inside Corner Flashing (PDF) (PDF - 31 Kb) Corners - 15 
Universal 15B - Field Fabricated Inside Corner (PDF) (PDF - 33 Kb) Corners - 15 
Universal 15B - Field Fabricated Inside Corner (PDF) (PDF - 33 Kb) Corners - 15 
Universal 15C - Pre-Molded Outside Corner (PDF) (PDF - 28 Kb) Corners - 15 
Universal 15C - Pre-Molded Outside Corner (PDF) (PDF - 28 Kb) Corners - 15 
Universal 15D - Field Fabricated Outside Corner (PDF) (PDF - 30 Kb) Corners - 15 
Universal 15D - Field Fabricated Outside Corner (PDF) (PDF - 30 Kb) Corners - 15 
Universal 15E - Inside Corner with Coated Metal Wall Flashing (PDF) (PDF - 42 Kb) Corners - 15 
Universal 15E - Inside Corner with Coated Metal Wall Flashing (PDF) (PDF - 42 Kb) Corners - 15 
Universal 15F - Pre-Molded Outside Corner with Coated Metal Wall Flashing (PDF) (PDF - 31 Kb) Corners - 15 
Universal 15F - Pre-Molded outside Corner With Coated Metal Wall Flashing (PDF) (PDF - 31 Kb) Corners - 15 
Universal 5A - Curb Flashing (PDF) (PDF - 32 Kb) Curb & Skylights - 5 
Universal 5A - Curb Flashing (PDF) (PDF - 32 Kb) Curb & Skylights - 5 
Universal 5B - Coated Metal Curb Flashing (PDF) (PDF - 37 Kb) Curb & Skylights - 5 
Universal 5B - Coated Metal Curb Flashing (PDF) (PDF - 37 Kb) Curb & Skylights - 5 
Universal 6A - Roof Drain (PDF) (PDF - 39 Kb) Drains - 6 
Universal 6A - Roof Drain (PDF) (PDF - 39 Kb) Drains - 6 
Universal 6B - Roof Drain (Drain Sump Greater than 3 Inches to 1 Horizontal Foot) (PDF) (PDF - 35 Kb) Drains - 6 
Universal 6B - Roof Drain, Sump Greater Than 3" to 1 Horizontal Foot (PDF) (PDF - 35 Kb) Drains - 6 
Universal 6C - Roof Drain Page 1 of 2 (PDF) (PDF - 33 Kb) Drains - 6 
Universal 6C - Roof Drain Page 2 of 2 (PDF) (PDF - 52 Kb) Drains - 6 
Universal 6C - Roof Drain, Page 1 of 2 (PDF) (PDF - 33 Kb) Drains - 6 
Universal 6C - Roof Drain, Page 2 of 2 (PDF) (PDF - 52 Kb) Drains - 6 
Universal 3A - Expansion Joint Deck to Deck (PDF) (PDF - 37 Kb) Expansion Joints - 3 
Universal 3A - Expansion Joint Deck to Deck (PDF) (PDF - 37 Kb) Expansion Joints - 3 
Universal 3B - Expansion Joint at Junction of Deck and Wall (PDF) (PDF - 35 Kb) Expansion Joints - 3 
Universal 3B - Expansion Joint at Junction of Deck to Wall (PDF) (PDF - 35 Kb) Expansion Joints - 3 
Mechanically Fastened 27 - Carlisle Insulation Attachment (PDF) (PDF - 27 Kb) Insulation Attachment - 27 
Mechanically-Fastened 27 - Carlisle Insulation Attachment (PDF) (PDF - 27 Kb) Insulation Attachment - 27 
Mechanically-Fastened 22 - Ridge Membrane Securement (PDF) (PDF - 31 Kb) Membrane Attachment - 21 
PVC Coated Metal Fabrication for ES-1 Compliance (PDF) (PDF - 37 Kb) Metal Edging & Gravel Stop - 1 
Universal 1A - Carlisle SecurEdge Anchor Bar Edging (PDF) (PDF - 32 Kb) Metal Edging & Gravel Stop - 1 
Universal 1A- Carlisle SecurEdge Anchor Bar Edging (PDF) (PDF - 32 Kb) Metal Edging & Gravel Stop - 1 
Universal 1B - Carlisle SecurEdge 200 Option 2 (PDF) (PDF - 31 Kb) Metal Edging & Gravel Stop - 1 
Universal 1B - Carlisle SecurEdge Option 1 (PDF) (PDF - 30 Kb) Metal Edging & Gravel Stop - 1 
Universal 1B - Option 2 - Carlisle SecurEdge 200 (PDF) (PDF - 31 Kb) Metal Edging & Gravel Stop - 1 
Universal 1C - Metal Bar Edge Termination (PDF) (PDF - 25 Kb) Metal Edging & Gravel Stop - 1 
Universal 1C - Metal Bar Termination (PDF) (PDF - 25 Kb) Metal Edging & Gravel Stop - 1 
Universal 1D - Coated Metal Drip Edge (PDF) (PDF - 60 Kb) Metal Edging & Gravel Stop - 1 
Universal 1D - Coated Metal Drip Edge (PDF) (PDF - 60 Kb) Metal Edging & Gravel Stop - 1 
Universal 12A - Parapet Flashing (PDF) (PDF - 34 Kb) Parapet & Curbs - 12 
Universal 12A - Parapet Flashing (PDF) (PDF - 34 Kb) Parapet & Curbs - 12 
Universal 12B - Coated Metal Wall Flashing (PDF) (PDF - 39 Kb) Parapet & Curbs - 12 
Universal 12B - Coated Metal Wall Flashing (PDF) (PDF - 39 Kb) Parapet & Curbs - 12 
Universal 12D - Parapet Flashing Greater Than 48" - Horizontal Securement Option (PDF) (PDF - 37 Kb) Parapet & Curbs - 12 
Universal 12E - Parapet Flashing - No Adhesion - Any Height (PDF) (PDF - 32 Kb) Parapet & Curbs - 12 
Universal 8B - Field Fabricated Pipe Flashing (PDF) (PDF - 38 Kb) Pipe Flashings - 14 
Universal 8B - Field Fabricated Pipe Flashing (PDF) (PDF - 38 Kb) Pipe Flashings - 14 
Universal 8C - Field Fabricated Hot Pipe (PDF) (PDF - 33 Kb) Pipe Flashings - 14 
Universal 8C Field Fabricated Hot Pipe (PDF) (PDF - 33 Kb) Pipe Flashings - 14 
Universal 8A - Pre-Molded Pipe Flashing (PDF) (PDF - 41 Kb) Pipes - 8 
Universal 8A - Sure-Flex Pre-Molded Pipe Flashing (PDF) (PDF - 41 Kb) Pipes - 8 
Universal 16 - Molded Sealant Pocket (PDF) (PDF - 46 Kb) Pockets - 16 
Universal 16 - Molded Sealant Pocket (PDF) (PDF - 46 Kb) Pockets - 16 
Universal 18 - Scupper With Coated Metal (PDF) (PDF - 44 Kb) Scuppers - 18 
Universal 18 - Scupper with Coated Metal (PDF) (PDF - 44 Kb) Scuppers - 18 
Mechanically Fastened 2 - Membrane Securement (PDF) (PDF - 29 Kb) Splices - 2 
Mechanically Fastened 2A - Lap Cross Section (PDF) (PDF - 26 Kb) Splices - 2 
Mechanically Fastened 2B - Plate and Fastener Placement (PDF) (PDF - 24 Kb) Splices - 2 
Mechanically Fastened 2C - Splice Intersection with .060" or .080" Thick Membrane (PDF) (PDF - 27 Kb) Splices - 2 
Mechanically-Fastened 2 - Membrane Securement (PDF) (PDF - 29 Kb) Splices - 2 
Mechanically-Fastened 2A - Lap Cross Section (PDF) (PDF - 26 Kb) Splices - 2 
Mechanically-Fastened 2B - Plate and Fastener Placement (PDF) (PDF - 24 Kb) Splices - 2 
Mechanically-Fastened 2C - Splice Intersection With .060" Thick Membrane (PDF) (PDF - 27 Kb) Splices - 2 
Universal 2 - Lap Cross Section (PDF) (PDF - 23 Kb) Splices - 2 
Universal 2 - Lap Cross Section (PDF) (PDF - 23 Kb) Splices - 2 
Universal 9 - Flashing Terminations (PDF) (PDF - 44 Kb) Terminations - 9 
Universal 9 - Flashing Terminations (PDF) (PDF - 44 Kb) Terminations - 9 
Universal 13 - Tie-In to Existing Single-Ply (PDF) (PDF - 33 Kb) Tie-Ins (BUR & EPDM) - 13 
Universal 13 - Tie-In to Existing Single-Ply (PDF) (PDF - 33 Kb) Tie-Ins (BUR & EPDM) - 13 
RG - Roof Garden back to top
GR-1A Ultra-Extensive (Shallow) Roof Garden Edging (EPDM) (PDF) (PDF - 63 Kb) Roof Garden - Traditional 
GR-1AW Ultra-Extensive (Shallow) Roof Garden Edging - West Coast (PDF) (PDF - 75 Kb) Roof Garden - Traditional 
GR-1B Extensive (Medium) Roof Garden Edging (TPO) (PDF) (PDF - 64 Kb) Roof Garden - Traditional 
GR-1C Intensive (Deep) Roof Garden Edging (PDF) (PDF - 72 Kb) Roof Garden - Traditional 
GR-4A Ultra-Extensive (Shallow) High Slope Roof Garden (PDF) (PDF - 69 Kb) Roof Garden - Traditional 
GR-6A Ultra-Extensive (Shallow) Roof Garden Drain (PDF) (PDF - 73 Kb) Roof Garden - Traditional 
GR-6AW Ultra-Extensive (Shallow) Roof Garden Drain - West Coast (PDF) (PDF - 81 Kb) Roof Garden - Traditional 
GR-6B Extensive (Medium) Roof Garden Drain (PDF) (PDF - 82 Kb) Roof Garden - Traditional 
GR-6C Intensive (Deep) Roof Garden Drain (PDF) (PDF - 68 Kb) Roof Garden - Traditional 
GR-A-EPDM Ultra-Extensive (Shallow) Roof Garden - EPDM (PDF) (PDF - 54 Kb) Roof Garden - Traditional 
GR-A-FBACK Ultra-Extensive (Shallow) Roof Garden - FleeceBACK (PDF) (PDF - 29 Kb) Roof Garden - Traditional 
GR-A-TPO Ultra-Extensive (Shallow) Roof Garden - TPO (PDF) (PDF - 53 Kb) Roof Garden - Traditional 
GR-A-WEST Ultra-Extensive (Shallow) Roof Garden - West Coast (PDF) (PDF - 73 Kb) Roof Garden - Traditional 
GR-B-EPDM Extensive (Medium) Roof Garden - EPDM (PDF) (PDF - 59 Kb) Roof Garden - Traditional 
GR-B-FBACK Extensive (Medium) Roof Garden - FleeceBACK (PDF) (PDF - 40 Kb) Roof Garden - Traditional 
GR-B-TPO Extensive (Medium) Roof Garden - TPO (PDF) (PDF - 61 Kb) Roof Garden - Traditional 
GR-C-EPDM Intensive (Deep) Roof Garden (EPDM) (PDF) (PDF - 60 Kb) Roof Garden - Traditional 
GR-C-FBACK Intensive (Deep) Roof Garden - FleeceBACK (PDF) (PDF - 41 Kb) Roof Garden - Traditional 
GR-C-TPO Intensive (Deep) Roof Garden (TPO) (PDF) (PDF - 51 Kb) Roof Garden - Traditional 
GG-A Green Grid Tray Profile (PDF) (PDF - 153 Kb) Specification Bulletins 
GG-B Green Grid Parapet/Curb Flashing (PDF) (PDF - 66 Kb) Specification Bulletins 
GG-C Green Grid Dutch Gutter (PDF) (PDF - 56 Kb) Specification Bulletins 
GG-D Green Grid Roof Drain (PDF) (PDF - 72 Kb) Specification Bulletins 
GG-E Green Grid Transition to Walkway (PDF) (PDF - 59 Kb) Specification Bulletins 
GG-F Green Grid Walkway Paver (PDF) (PDF - 110 Kb) Specification Bulletins 
GG-G Green Grid Roof Corner & Perimeter Detail (PDF) (PDF - 195 Kb) Specification Bulletins 
GG-H Green Grid Segregation Detail: Between Garden & Exposed Single Ply Roof (PDF) (PDF - 107 Kb) Specification Bulletins 
GG-I Green Grid Segregation Detail: Between Garden Roof & Existing Roof (PDF) (PDF - 87 Kb) Specification Bulletins 
GG-J Green Grid Intermittent Wall Scupper (PDF) (PDF - 83 Kb) Specification Bulletins 
GG-K Green Grid Through-Wall Scupper (PDF) (PDF - 81 Kb) Specification Bulletins 
XC - X-Tenda Coat back to top
CS-1 Seam Preparations (PDF) (PDF - 28 Kb) Acrylic Coating 
CS-2 Gravel Stop Flashing Repairs (PDF) (PDF - 31 Kb) Acrylic Coating 
CS-3 Gravel Stop w/Uncured Flashing (PDF) (PDF - 17 Kb) Acrylic Coating 
CS-4 Parapet/Curb Flashing (PDF) (PDF - 33 Kb) Acrylic Coating 
CS-5 Existing Parapet Flashing Seam Overlay (PDF) (PDF - 47 Kb) Acrylic Coating 
CS-5-A Existing Uncured EPDM Parapet Flashing (PDF) (PDF - 48 Kb) Acrylic Coating 
CS-6 Pourable Sealer Pocket Repair (PDF) (PDF - 37 Kb) Acrylic Coating 
TPO - Sure-Weld back to top
SW-1B Carlisle SecurEdge 200 Option 2 (pdf) (PDF - 0 Kb) Metal Edging & Gravel Stop - 1 
DL-DryLight back to top
DL-SL-5A-Insulated Curb Section (PDF - 147 Kb) Cross Sectional Details 
DL-SL-5B-Curb by Others (PDF - 147 Kb) Cross Sectional Details 
DL-SL-5C-Composite OSB & EPS Insulated Curb (SIPS Curb) (PDF - 155 Kb) Cross Sectional Details 
Tubular Office Kit Detail (PDF - 311 Kb) Curb & Skylights - 5 
DL-SL-5D-New Carlisle Self-Flashing Metal Curb-EPDM (PDF - 48 Kb) Flashing Details 
DL-SL-5E-Pressure Sensitive EPDM Curb Flashing (PDF - 55 Kb) Flashing Details 
DL-SL-5F-Pre-Fabricated TPO/PVC Flashing Sleeve (PDF - 50 Kb) Flashing Details 
CS - Cold Storage back to top
6.4.1 Cold Storage Envelope Smoke Vent Detail (PDF) (PDF - 94 Kb) Curb & Skylights - 5 
3.3.1 Cold Storage Envelope IWP: Exposed Rising Wall, Deck-to-Wall Expansion Joint (PDF) (PDF - 136 Kb) Expansion Joints - 3 
3.3.2 Cold Storage Envelope IWP: Exposed Rising Wall, Deck-to-Wall Expansion Joint (PDF) (PDF - 136 Kb) Expansion Joints - 3 
3.4.1 Cold Storage Envelope IWP: Covered Rising Wall, Deck-to-Wall Expansion Joint (PDF) (PDF - 132 Kb) Expansion Joints - 3 
3.4.2 Cold Storage Envelope IWP: Covered Rising Wall, Deck-to-Wall Expansion Joint (PDF) (PDF - 133 Kb) Expansion Joints - 3 
5.3.1 Cold Storage Envelope Low Profile Expansion Joint Detail (PDF) (PDF - 114 Kb) Expansion Joints - 3 
5.4.1 Cold Storage Envelope Curbed Expansion Joint Detail (PDF) (PDF - 103 Kb) Expansion Joints - 3 
5.5.1 Cold Storage Envelope IWP: Tie-In Between Existing Cold to New Cold Addition (PDF) (PDF - 139 Kb) Expansion Joints - 3 
1.1.1 - Cold Storage Envelope Universal Detail - Roof Edge Detail (PDF) (PDF - 122 Kb) Metal Edging & Gravel Stop - 1 
1.1.2 - Cold Storage Envelope Universal Detail - Roof Edge Detail (PDF) (PDF - 117 Kb) Metal Edging & Gravel Stop - 1 
1.1.3 - Cold Storage Envelope Universal Detail - Roof Edge Detail (PDF) (PDF - 121 Kb) Metal Edging & Gravel Stop - 1 
1.1.4 - Cold Storage Envelope Universal Detail - Roof Edge Detail (PDF) (PDF - 117 Kb) Metal Edging & Gravel Stop - 1 
1.1.5 - Cold Storage Envelope Universal Detail - Roof Edge Detail (PDF) (PDF - 236 Kb) Metal Edging & Gravel Stop - 1 
1.2.1 - Cold Storage Envelope Universal Detail - Roof Edge Detail (PDF) (PDF - 110 Kb) Metal Edging & Gravel Stop - 1 
1.2.2 Cold Storage Universal Detail - Carlisle Securedge 2000 (PDF) (PDF - 158 Kb) Metal Edging & Gravel Stop - 1 
4.1.1 Cold Storage Envelope IWP: Roof Edge with Gutter Detail (PDF) (PDF - 124 Kb) Metal Edging & Gravel Stop - 1 
4.1.2 Cold Storage Envelope IWP: Roof Edge with Gutter Detail (PDF) (PDF - 239 Kb) Metal Edging & Gravel Stop - 1 
2.1.1 Cold Storage Envelope Universal Detail - Roof Parapet Wall Detail (PDF) (PDF - 128 Kb) Parapet & Curbs - 12 
2.1.2 Cold Storage Envelope Universal Detail - Roof Parapet Wall Detail (PDF) (PDF - 129 Kb) Parapet & Curbs - 12 
2.2.1 Cold Storage Envelope Universal Detail - Roof Edge Detail (PDF) (PDF - 196 Kb) Parapet & Curbs - 12 
3.1.1 Cold Storage Envelope IWP: Exposed Rising Wall Flashing (PDF) (PDF - 128 Kb) Parapet & Curbs - 12 
3.1.2 Cold Storage Envelope IWP: Exposed Rising Wall Flashing (PDF) (PDF - 127 Kb) Parapet & Curbs - 12 
3.2.1 Cold Storage Envelope IWP: Covered Rising Wall Flashing (PDF) (PDF - 123 Kb) Parapet & Curbs - 12 
3.2.2 Cold Storage Envelope IWP: Covered Rising Wall Flashing (PDF) (PDF - 122 Kb) Parapet & Curbs - 12 
6.1.1 Cold Storage Envelope Non Insulated Pipe: Premolded Pipe Flashing (PDF) (PDF - 111 Kb) Penetration - 30 
6.2.1 Cold Storage Envelope Non Insulated Pipe: Field Fabricated Flashing (PDF) (PDF - 110 Kb) Penetration - 30 
7.1.1 Cold Storage Envelope Insulated Pipe: Field Fabricated Flashing (PDF) (PDF - 104 Kb) Penetration - 30 
7.2.1 Cold Storage Envelope Insulated Pipe(s): Pourable Sealer Pocket (PDF) (PDF - 131 Kb) Pockets - 16 
4.2.1 Cold Storage Envelope IWP: Through Wall Scupper Flashing Detail (PDF) (PDF - 166 Kb) Scuppers - 18 
5.1.1 Cold Storage Envelope IWP: Transition Between Cold & Warm Areas (PDF) (PDF - 157 Kb) Terminations - 9 
5.2.1 Cold Storage Envelope IWP: Transition Between Cold & Warm Spaces (PDF) (PDF - 322 Kb) Terminations - 9 

page divider

Carlisle SynTec
P.O. Box 7000, Carlisle, PA 17013
800-4-SYNTEC   Fax: 717-245-7053
Web Support: 1-800-434-2279

0